Added board definition for nyquist and add RGB and LED pins for nyquest and iris

kmk/boards/iris_converter.py

@@ -16,8 +16,11 @@ class Firmware(_Firmware):
 
     split_flip = True
     split_offsets = (6, 6, 6, 6, 6)
-    split_type = "UART"
+    split_type = 'UART'
     uart_pin = board.SCL
+    extra_data_pin = board.SDA
+    rgb_pixel_pin = board.TX
+    led_pin = board.D7
 
     coord_mapping = []
     coord_mapping.extend(ic(0, x) for x in range(12))

kmk/boards/levinson_converter.py

@@ -0,0 +1,19 @@
+import board
+
+from kmk.consts import DiodeOrientation
+from kmk.mcus.circuitpython_samd51 import Firmware as _Firmware
+from kmk.pins import Pin as P
+
+
+class Firmware(_Firmware):
+    col_pins = (P.A2, P.A3, P.A4, P.A5, P.SCK, P.MOSI)
+    row_pins = (P.D13, P.D11, P.D10, P.D9)
+    diode_orientation = DiodeOrientation.COLUMNS
+
+    split_type = 'UART'
+    split_flip = True
+    split_offsets = [6, 6, 6, 6, 6]
+    uart_pin = board.SCL
+    extra_data_pin = board.SDA
+    rgb_pixel_pin = board.TX
+    #led_pin = board.D7

kmk/boards/nyquist_converter.py

@@ -0,0 +1,19 @@
+import board
+
+from kmk.consts import DiodeOrientation
+from kmk.mcus.circuitpython_samd51 import Firmware as _Firmware
+from kmk.pins import Pin as P
+
+
+class Firmware(_Firmware):
+    col_pins = (P.RX, P.A1, P.A2, P.A3, P.A4, P.A5)
+    row_pins = (P.D13, P.D11, P.D10, P.D9, P.D7)
+    diode_orientation = DiodeOrientation.COLUMNS
+
+    split_type = 'UART'
+    split_flip = True
+    split_offsets = [6, 6, 6, 6, 6]
+    uart_pin = board.SCL
+    rgb_pixel_pin = board.TX
+    extra_data_pin = board.SDA
+