From 84a3fa8a049629b719b7007477ed8f7873cd7147 Mon Sep 17 00:00:00 2001 From: Kyle Brown Date: Tue, 4 Dec 2018 16:34:37 -0800 Subject: [PATCH] Update README.md Small typo and added better readability for translating to code, which is why most users will be here (adding a keyboard) --- hardware/README.md | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/hardware/README.md b/hardware/README.md index ebf529a..41f9380 100644 --- a/hardware/README.md +++ b/hardware/README.md @@ -13,12 +13,12 @@ GND | GND GND | GND 2/PD1 | SDA 3/PD0 | SCL -4/PD4 | 13 -5/PC6 | 12 -6/PD7 | 11 -7/PE6 | 10 -8/PB4 | 9 -9/PB5 | 7 +4/PD4 | D13 +5/PC6 | D12 +6/PD7 | D11 +7/PE6 | D10 +8/PB4 | D9 +9/PB5 | D7 Raw | GND | GND RST | RST @@ -33,7 +33,7 @@ A0/PF7 | A3 ## So how do I use it? -1. The pads for the Pro Micro footprint are circled on the underside of the board. Solder male headers into these pads on the underside of the board (the same side as the markings) so that the pins extend "downward" so that they can be plugged int the keyboard. +1. The pads for the Pro Micro footprint are circled on the underside of the board. Solder male headers into these pads on the underside of the board (the same side as the markings) so that the pins extend "downward" so that they can be plugged into the keyboard. 2. The remaining pads are for the Itsy Bitsy. Assuming height is a concern, rather than soldering male headers into the Itsy Bitsy and female headers into the adapter board, instead place the long side of male headers through the Itsy Bitsy pads from underneath the board so that they protrude through he pads on the top of the board and solder them in place. Make sure to keep the headers perpindicular to the surface of the board.