Re-add LED support

This reverts commit 5b069a0104.

kmk/boards/converter/fourtypercentclub/gherkin.py

@@ -0,0 +1,9 @@
+from kmk.consts import DiodeOrientation
+from kmk.mcus.circuitpython_samd51 import Firmware as _Firmware
+from kmk.pins import Pin as P
+
+
+class Firmware(_Firmware):
+    col_pins = (P.D9, P.D10, P.D11, P.D12, P.D13, P.SCL)
+    row_pins = (P.A3, P.A4, P.A5, P.SCK, P.MOSI)
+    diode_orientation = DiodeOrientation.COLUMNS

kmk/boards/converter/fourtypercentclub/luddite.py

@@ -0,0 +1,13 @@
+import board
+
+from kmk.consts import DiodeOrientation
+from kmk.mcus.circuitpython_samd51 import Firmware as _Firmware
+from kmk.pins import Pin as P
+
+
+class Firmware(_Firmware):
+    col_pins = (P.A0, P.A1, P.A2, P.A3, P.A4, P.A5, P.SCK, P.MOSI)
+    row_pins = (P.TX, P.RX, P.SDA, P.SCL, P.D13, P.D12, P.D11, P.D10)
+    diode_orientation = DiodeOrientation.COLUMNS
+    rgb_pixel_pin = board.D9
+    rgb_num_pixels = 12

kmk/boards/converter/keebio/bdn9.py

@@ -0,0 +1,11 @@
+import board
+
+from kmk.consts import DiodeOrientation
+from kmk.mcus.circuitpython_samd51 import Firmware as _Firmware
+from kmk.pins import Pin as P
+
+
+class Firmware(_Firmware):
+    col_pins = (P.RX, P.D13, P.A0, P.D11, P.A4, P.A5, P.D10, P.D9, P.SCK)
+    diode_orientation = DiodeOrientation.COLUMNS
+    rgb_pixel_pin = board.TX

kmk/boards/converter/keebio/fourier.py

@@ -0,0 +1,16 @@
+import board
+
+from kmk.consts import DiodeOrientation
+from kmk.mcus.circuitpython_samd51 import Firmware as _Firmware
+from kmk.pins import Pin as P
+
+
+class Firmware(_Firmware):
+    col_pins = (P.A1, P.A2, P.A3, P.A4, P.A5, P.SCK, P.MOSI)
+    row_pins = (P.A0, P.D11, P.D10, P.D9)
+    diode_orientation = DiodeOrientation.COLUMNS
+    rgb_pixel_pin = board.TX
+    uart_pin = board.SCL
+    split_type = 'UART'
+    split_flip = True
+    split_offsets = [7, 7, 7, 7]

kmk/boards/converter/keebio/iris_r1.py

@@ -0,0 +1,16 @@
+import board
+
+from kmk.consts import DiodeOrientation
+from kmk.mcus.circuitpython_samd51 import Firmware as _Firmware
+from kmk.pins import Pin as P
+
+
+class Firmware(_Firmware):
+    col_pins = (P.A2, P.A3, P.A4, P.A5, P.SCK, P.MOSI)
+    row_pins = (P.D11, P.D10, P.D9, P.D7, P.D13)
+    diode_orientation = DiodeOrientation.COLUMNS
+    rgb_pixel_pin = board.TX
+    uart_pin = board.SCL
+    split_type = 'UART'
+    split_flip = True
+    split_offsets = [6, 6, 6, 6, 6]

kmk/boards/converter/keebio/iris_r2.py

@@ -16,8 +16,11 @@ class Firmware(_Firmware):
 
     split_flip = True
     split_offsets = (6, 6, 6, 6, 6)
-    split_type = "UART"
+    split_type = 'UART'
     uart_pin = board.SCL
+    extra_data_pin = board.SDA
+    rgb_pixel_pin = board.TX
+    led_pin = board.D7
 
     coord_mapping = []
     coord_mapping.extend(ic(0, x) for x in range(12))

kmk/boards/converter/keebio/lapace.py

@@ -0,0 +1,12 @@
+import board
+
+from kmk.consts import DiodeOrientation
+from kmk.mcus.circuitpython_samd51 import Firmware as _Firmware
+from kmk.pins import Pin as P
+
+
+class Firmware(_Firmware):
+    col_pins = (P.SDA, P.A2, P.A3, P.A4, P.A5, P.SCK, P.MOSI)
+    row_pins = (P.TX, P.A0, P.RX, P.A1, P.D11, P.D9, P.D12, P.D10)
+    diode_orientation = DiodeOrientation.COLUMNS
+    rgb_pixel_pin = board.D13

kmk/boards/converter/keebio/levinson_r1.py

@@ -0,0 +1,16 @@
+import board
+
+from kmk.consts import DiodeOrientation
+from kmk.mcus.circuitpython_samd51 import Firmware as _Firmware
+from kmk.pins import Pin as P
+
+
+class Firmware(_Firmware):
+    col_pins = (P.A2, P.A3, P.A4, P.A5, P.SCK, P.A0)
+    row_pins = (P.D11, P.D10, P.D9, P.D7)
+    diode_orientation = DiodeOrientation.COLUMNS
+    rgb_pixel_pin = board.TX
+    uart_pin = board.SCL
+    split_type = 'UART'
+    split_flip = True
+    split_offsets = [6, 6, 6, 6]

kmk/boards/converter/keebio/levinson_r2.py

@@ -0,0 +1,19 @@
+import board
+
+from kmk.consts import DiodeOrientation
+from kmk.mcus.circuitpython_samd51 import Firmware as _Firmware
+from kmk.pins import Pin as P
+
+
+class Firmware(_Firmware):
+    col_pins = (P.A2, P.A3, P.A4, P.A5, P.SCK, P.MOSI)
+    row_pins = (P.D13, P.D11, P.D10, P.D9)
+    diode_orientation = DiodeOrientation.COLUMNS
+
+    split_type = 'UART'
+    split_flip = True
+    split_offsets = [6, 6, 6, 6, 6]
+    uart_pin = board.SCL
+    extra_data_pin = board.SDA
+    rgb_pixel_pin = board.TX
+    # led_pin = board.D7

kmk/boards/converter/keebio/nyquist_r1.py

@@ -0,0 +1,16 @@
+import board
+
+from kmk.consts import DiodeOrientation
+from kmk.mcus.circuitpython_samd51 import Firmware as _Firmware
+from kmk.pins import Pin as P
+
+
+class Firmware(_Firmware):
+    col_pins = (P.A2, P.A3, P.A4, P.A5, P.SCK, P.MOSI)
+    row_pins = (P.D13, P.D11, P.D10, P.D9, P.D7)
+    diode_orientation = DiodeOrientation.COLUMNS
+    rgb_pixel_pin = board.TX
+    uart_pin = board.SCL
+    split_type = 'UART'
+    split_flip = True
+    split_offsets = [6, 6, 6, 6, 6]

kmk/boards/converter/keebio/nyquist_r2.py

@@ -0,0 +1,18 @@
+import board
+
+from kmk.consts import DiodeOrientation
+from kmk.mcus.circuitpython_samd51 import Firmware as _Firmware
+from kmk.pins import Pin as P
+
+
+class Firmware(_Firmware):
+    col_pins = (P.RX, P.A1, P.A2, P.A3, P.A4, P.A5)
+    row_pins = (P.D13, P.D11, P.D10, P.D9, P.D7)
+    diode_orientation = DiodeOrientation.COLUMNS
+
+    split_type = 'UART'
+    split_flip = True
+    split_offsets = [6, 6, 6, 6, 6]
+    uart_pin = board.SCL
+    rgb_pixel_pin = board.TX
+    extra_data_pin = board.SDA

kmk/boards/converter/keebio/quefrency.py

@@ -0,0 +1,17 @@
+import board
+
+from kmk.consts import DiodeOrientation
+from kmk.mcus.circuitpython_samd51 import Firmware as _Firmware
+from kmk.pins import Pin as P
+
+
+class Firmware(_Firmware):
+    # Will need additional work and testing
+    col_pins = (P.A1, P.A2, P.A3, P.A4, P.A5, P.SCK, P.MOSI, P.D12)
+    row_pins = (P.A0, P.D13, P.D11, P.D10, P.D9, P.D7)
+    diode_orientation = DiodeOrientation.COLUMNS
+    rgb_pixel_pin = board.TX
+    uart_pin = board.SCL
+    split_type = 'UART'
+    split_flip = False
+    split_offsets = [8, 8, 8, 8, 8, 8]

kmk/boards/converter/keebio/rorschach.py

@@ -0,0 +1,16 @@
+import board
+
+from kmk.consts import DiodeOrientation
+from kmk.mcus.circuitpython_samd51 import Firmware as _Firmware
+from kmk.pins import Pin as P
+
+
+class Firmware(_Firmware):
+    col_pins = (P.A2, P.A3, P.A4, P.A5, P.SCK, P.MOSI)
+    row_pins = (P.D11, P.D10, P.D9, P.RX, P.D13)
+    diode_orientation = DiodeOrientation.COLUMNS
+    rgb_pixel_pin = board.TX
+    uart_pin = board.SCL
+    split_type = 'UART'
+    split_flip = True
+    split_offsets = [6, 6, 6, 6, 6]

kmk/boards/converter/keebio/tragicforce68.py

@@ -0,0 +1,9 @@
+from kmk.consts import DiodeOrientation
+from kmk.mcus.circuitpython_samd51 import Firmware as _Firmware
+from kmk.pins import Pin as P
+
+
+class Firmware(_Firmware):
+    col_pins = (P.A0, P.A1, P.A2, P.A3, P.A4, P.A5, P.SCK, P.MOSI)
+    row_pins = (P.TX, P.RX, P.SDA, P.SCL, P.D9, P.D10, P.D12, P.D11, P.D13)
+    diode_orientation = DiodeOrientation.COLUMNS

kmk/boards/converter/keebio/viterbi_r1.py

@@ -0,0 +1,16 @@
+import board
+
+from kmk.consts import DiodeOrientation
+from kmk.mcus.circuitpython_samd51 import Firmware as _Firmware
+from kmk.pins import Pin as P
+
+
+class Firmware(_Firmware):
+    col_pins = (P.A1, P.A2, P.A3, P.A4, P.A5, P.SCK, P.MOSI)
+    row_pins = (P.D13, P.D11, P.D10, P.D9, P.D7)
+    diode_orientation = DiodeOrientation.COLUMNS
+    rgb_pixel_pin = board.TX
+    uart_pin = board.SCL
+    split_type = 'UART'
+    split_flip = True
+    split_offsets = [7, 7, 7, 7, 7]

kmk/boards/converter/keebio/viterbi_r2.py

@@ -0,0 +1,16 @@
+import board
+
+from kmk.consts import DiodeOrientation
+from kmk.mcus.circuitpython_samd51 import Firmware as _Firmware
+from kmk.pins import Pin as P
+
+
+class Firmware(_Firmware):
+    col_pins = (P.A0, P.A1, P.A2, P.A3, P.A4, P.A5, P.SCK)
+    row_pins = (P.D13, P.D11, P.D10, P.D9, P.D7)
+    diode_orientation = DiodeOrientation.COLUMNS
+    rgb_pixel_pin = board.TX
+    uart_pin = board.SCL
+    split_type = 'UART'
+    split_flip = True
+    split_offsets = [7, 7, 7, 7, 7]

kmk/boards/converter/lets-split/lets-split_r1.py

@@ -0,0 +1,16 @@
+import board
+
+from kmk.consts import DiodeOrientation
+from kmk.mcus.circuitpython_samd51 import Firmware as _Firmware
+from kmk.pins import Pin as P
+
+
+class Firmware(_Firmware):
+    col_pins = (P.A5, P.A4, P.A3, P.A2, P.A1, P.A0)
+    row_pins = (P.D7, P.D9, P.D10, P.D11)
+    diode_orientation = DiodeOrientation.COLUMNS
+    rgb_pixel_pin = board.TX
+    uart_pin = board.SCL
+    split_type = 'UART'
+    split_flip = True
+    split_offsets = [6, 6, 6, 6]

kmk/boards/converter/lets-split/lets-split_r2.py

@@ -0,0 +1,16 @@
+import board
+
+from kmk.consts import DiodeOrientation
+from kmk.mcus.circuitpython_samd51 import Firmware as _Firmware
+from kmk.pins import Pin as P
+
+
+class Firmware(_Firmware):
+    col_pins = (P.MOSI, P.SCK, P.A5, P.A4, P.A3, P.A2)
+    row_pins = (P.D11, P.D10, P.D9, P.D7)
+    diode_orientation = DiodeOrientation.COLUMNS
+    rgb_pixel_pin = board.TX
+    uart_pin = board.SCL
+    split_type = 'UART'
+    split_flip = True
+    split_offsets = [6, 6, 6, 6]