From dacd70f7999eac1535f8f6c4da94a325143e5ca3 Mon Sep 17 00:00:00 2001 From: Kyle Brown Date: Tue, 27 Nov 2018 15:11:12 -0800 Subject: [PATCH] Fix typo --- hardware/README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hardware/README.md b/hardware/README.md index 2074fa3..64a4bfd 100644 --- a/hardware/README.md +++ b/hardware/README.md @@ -35,7 +35,7 @@ A0/PF7 | A3 ## So how do I use it? 1. The pads for the Pro Micro footprint are circled on the underside of the board. Solder male headers into these pads on the underside of the board (the same side as the markings) so that the pins extend "downward" so that they can be plugged int the keyboard. -2. The remaining pads are for the Itsy Bitsy. Assuming height is a concern, rather than dsoldering male headers into the Itsy Bitsy and female headers into the adapter board, instead place the long side of male headers through the Itsy Bitsy pads from underneath the board so that they protrude through he pads on the top of the board and solder them in place. Make sure to keep the headers perpindicular to the surface of the board. +2. The remaining pads are for the Itsy Bitsy. Assuming height is a concern, rather than desoldering male headers into the Itsy Bitsy and female headers into the adapter board, instead place the long side of male headers through the Itsy Bitsy pads from underneath the board so that they protrude through he pads on the top of the board and solder them in place. Make sure to keep the headers perpindicular to the surface of the board. 3. Once soldered, place the Itsy Bitsy board over the headers that are now protruding upwards so that the headers go through the pads of the ItsyBitsy and solder in place.