From eecbc995d40070e2d8434573d9b9a9afd1653169 Mon Sep 17 00:00:00 2001 From: Kyle Brown Date: Sat, 1 Dec 2018 00:15:00 -0800 Subject: [PATCH] Update README.md --- hardware/README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hardware/README.md b/hardware/README.md index 64a4bfd..ebf529a 100644 --- a/hardware/README.md +++ b/hardware/README.md @@ -35,7 +35,7 @@ A0/PF7 | A3 ## So how do I use it? 1. The pads for the Pro Micro footprint are circled on the underside of the board. Solder male headers into these pads on the underside of the board (the same side as the markings) so that the pins extend "downward" so that they can be plugged int the keyboard. -2. The remaining pads are for the Itsy Bitsy. Assuming height is a concern, rather than desoldering male headers into the Itsy Bitsy and female headers into the adapter board, instead place the long side of male headers through the Itsy Bitsy pads from underneath the board so that they protrude through he pads on the top of the board and solder them in place. Make sure to keep the headers perpindicular to the surface of the board. +2. The remaining pads are for the Itsy Bitsy. Assuming height is a concern, rather than soldering male headers into the Itsy Bitsy and female headers into the adapter board, instead place the long side of male headers through the Itsy Bitsy pads from underneath the board so that they protrude through he pads on the top of the board and solder them in place. Make sure to keep the headers perpindicular to the surface of the board. 3. Once soldered, place the Itsy Bitsy board over the headers that are now protruding upwards so that the headers go through the pads of the ItsyBitsy and solder in place.